Posts tagged JXD S5800

JXD S5800 Protoype Arrives At Willgoo HQ

5

S5800_01

Willgoo have acquired a prototype of JXD’s new MTK6582 smartphone-come-handheld, and will shortly be putting it through its paces. The machine sports a 5 inch 960×540 display, runs on Android 4.2 and contains a 3000mah battery as well as dual analog sticks and 4 shoulder buttons. This is the 6582′s first outing in a gaming handheld, so we’ll have to wait and see how it stacks up against its rivals. But for now, you can ogle a few pictures courtesy of Vincent at Willgoo.

If you fancy a piece of the action, you can head to the product page and reserve yours for $169 shipped.

S5800_02

JXD’s 5 Inch S5800 Finally Arrives, But It’s Not What We Hoped

13

First of all, apologies for the length of time since my last post… Must try harder…

But I bring happy news for all of us waiting for that 5 inch from JXD. I guess seeing the success of the Much iReadyGo i5 may have spurred them on, because they’ve finally decided to hop on the wagon as well. Unfortunately, any hopes for a 5 inch variant of the S7800B are out of the window, because JXD ditched RockChip for their newcomer. Instead they’ve decided to go with a MediaTek chip just like in the Much i5.

 

JXD-S5800

 

 

The obvious bonus is that you can also use the device as a real live phone if you wanted. There are drawbacks too, however. The MT6582 (which is apparently going to power this machine, though don’t take it as gospel yet because some sites are reporting MT6589) is not as powerful as the MT6589 inside the i5, which in turn is not as powerful as the RK3188 too. The quad core Cortex A7 1.3GhZ chip is a low cost offering from MediaTek, primarily aimed to feature in budget (<$100) Chinese smartphones.

Willgoo did have a pre-order product page up for this, but as of writing it seems to have disappeared. Never the less, once it’s available I’m confident they will stock it. So for now, you can read the article on thedroidguy website and either curse JXD for scrapping the RK3188 variant, or start saving some money. The choice is yours. I might do both.

Update: Willgoo product page is back up.

Thanks to Mateus for sending this in!

 

 

Round Up Of Current And Forthcoming Handhelds

18

Let’s have a look at some forthcoming and currently available handhelds on the market. This post will (briefly) cover some of the new machines I’ve already posted about and will also include a couple that have yet to get a mention here.

Non Android

Let’s face it, Android is not the perfect platform for a handheld. For a machine focussed on emulation, homebrew and ports a lightweight and minimal front end can be a better solution. Currently there are 3 machines available in this category.

Joyou A320+


joyoua320plus

This handheld undeservedly received quite a lot of hype on the dingoonity boards over the past couple of months. Allegedly formed from old staff of Dingoo Digital, the team at Joysinica have released a handheld named the Joyou A320+. Unfortunately it looks like nothing more than an attempted cash in on the A320′s good name. The handheld runs UCOS-II as an operating system just like the original Dingoo Digital A320 did. However this time they’ve opted for a chip from Actions Semiconductors instead of Ingenic, so an OpenDingux port or even any significant software improvements from the community are pretty unlikely. Reports on performance seem mixed – Jutley and Ruffnuts were the earliest adopters and seem pretty pleased with the way it works, however other buyers seem less impressed. If you’re considering this machine I would recommend reading this thread in full first, and then casting your eye over the other handhelds available in the Non Android category.

Manufacturer website
Retailer website

GCW Zero

KONICA MINOLTA DIGITAL CAMERA

I’m sure you’re familiar with this machine already, indeed I did cover it briefly in another article on this blog. If you’re looking for a true successor to the Dingoo A320 then this is the closest you’ll get currently, but be aware that the console is in its infancy and many of the emulators or ROMs you’d like to play are probably still in beta stages. Having said that, this machine’s Linux OS is fully open source and there is an active, talented and enthusiastic community of developers working on it all the time. The first batch of Special Edition machines had problems with the dpad and some of the buttons, but we are assured that this has been fixed and replacement parts are being shipped out to those affected. I decided to sell my unit instead of waiting for the replacements, but it’s likely I’ll buy another in a few months once the teething problems have been fully ironed out.

This console has a dedicated sub-forum at Dingoonity where you can find all the info you could ever need.

Manufacturer website
R
etailer websites – Dragonbox / Ithic

OpenPandora

pandora

Available in various incarnations for a few years now, the OpenPandora is the most expensive of the non Android machines – but is technically also the most advanced. Running a distribution of Linux called Angstrom this console has a varied and mature library of software available. The developer community is still active and the forums are still buzzing, so if your pockets are heavy with cash and you like the idea of a machine for tinkering as well as gaming then this one might be for you.

Retailer websites – Dragonbox / Ithic

Android

There are so many of these being manufactured I’d be here all day listing them all, so instead I’ll concentrate on the ones running off the latest quad core SoCs. The machines in this category are all powered by either a RockChip RK3188, MediaTek MT6589, Nvidia Tegra 4 or an AllWinner A31/A31S.

Nvidia Shield

nvidia-shield_2

If you want the newest, most powerful, and possibly the ugliest then your decision is already made. The Nvidia Shield began shipping a few weeks ago and sets a new benchmark in portable gaming prowess. Unfortunately if you’re outside of the US then getting hold of one might pose a problem unless you’re happy to use eBay or similar. The Shield is the first device to use Nvidia’s new flagship SoC, the Tegra 4 and compared to the next most powerful chip found in an Android handheld (RK3188), you can see that it beats it into a bloody pulp.

tegra-4-vs-rk3188-benchmark

 

Nvidia just released the full source code for this device allowing for hackers and tinkerers to do pretty much anything with it that they want. Check this article over on Liliputing for more info. JXD, are you listening?

Manufacturer website
Retailer website

JXD S7800

jxds7800

I’ve already covered JXD’s latest 7 incher in a few other posts, and Willgoo are currently accepting pre-orders for both the Model A and the Model B. The Model B is the one everyone will be going for as it is slightly more powerful than the Model A and houses a chip recently made favourable to modders. RockChip recently made available some Linux source code for this SoC and so it is not beyond the realms of possibility that we’ll be seeing some serious improvements over the stock software supplied by JXD, if the right developers can be pursuaded to get on board. Due to begin shipping in September, Willgoo are the ones supplying us westerners with this machine.

Manufacturer website
Retailer website – Model A / Model B

As usual, if you use the links I provided to make your purchase then I get a few pennies to put towards my unhealthy gadget obsession.

JXD S5800

jxds5800

Unfortunately still in the rumour mill phase, it’s not yet known if this device will ever see the light of day. Essentially it’s a scaled down version of the S7800 featuring an 800×480 5″ screen and will be powered by the RK3188. JXD have renders of the machine, but it’s not yet visible on their website. There are a lot of people hoping this device makes it to market, me included. Let’s wait and see.

Manufacturer website (not featured on the website yet)
Not currently available for pre-order

iReadyGo Much i5

muchi5

Is the brand name iReadyGo or is it Much? Who knows, but what we do know is that if the S5800 never makes it then all is not lost for gamers clamouring for a 5 inch handheld. Recently announced by Willgoo staff on the dingoonity forums, the i5 could be the first handheld to be powered by the MT6589. MediaTek chips are usually only found in China brand smartphones, and there’s a reason it features in this handheld – this 1.2Ghz quad core machine also works as a fully featured smartphone. The MT6589 won’t be as powerful as the RK3188, but should still be capable of emulating anything available in the Play Store and  playing most of the high end games available there too. I’ve never used Android on a MediaTek powered device but I have read that the Android port is very fast and stable, as long as the i5 manufacturers don’t mess it up!

If you check the Chinese website and translate the text from this page, it looks as though something will be happening with regards pre-orders on the 13th of August. I also get the impression from Google’s less than perfect translation that this thing will not be cheap!

Manufacturer website – English / Chinese
Not currently available for pre-order

GPD G5

G5-New D-PAD

Recently brought to our attention is this monstrosity from GPD. If comfortable gaming is your thing then it doesn’t look like you could do much better than an elongated Playstation pad with a screen stuck in the middle. It might look a tad unusual but only as much as the Shield from Nvidia! This one is powered by the RK3188 too, but looks to be a little way away from release date yet as there is still no mention of it on the manufacturer website.

Manufacturer website (not featured on the website yet)
Not currently available for pre-order

Iben L1

iben l1

If 7 inches is your thing and you’re not sold on JXD’s latest, maybe take a look at this AllWinner A31 powered machine from Iben. The L1 been available for a little while now and the consensus is that it’s pretty decent. I’ve covered it briefly before and there are some reviews doing the rounds as well, so head to dingoonity to check out hailrazer’s first impressions and over to the manguiro blog to check out a full featured review (albeit in Spanish, use translate). If you follow the link to the manufacturer website you’ll notice that they have their own forum dedicated to this device too, which is a nice touch.

Manufacturer website
Retailer website

 

And that’s that for now I think. I hope I covered everything relevant but if I forgot something please let me know.

Out With The Old…

10

Before I can even get the S7300 review out of the door, along comes news of JXD’s new machine. Initially there was to be an S5600 released alongside the S7300, but that was shelved and taking its place is the S5800. Although it probably won’t be released until Summer, JXD have already said that the hardware mapping bugs on the S7300 will be squished in their new machine. Rumour has it there will be 2 variants, the model A and the model B, though whether both of these materialise will remain to be seen. Model A is is going to be another dual core machine (probably the same AMLogic found in the S7300) and the model B will be a quad core with 2GB of RAM and an IPS screen. Both consoles will be 5 inches and will hopefully look similar (albeit smaller) to the S7300.

There is no official spec for either console yet, but what do you reckon will be powering the JXD S5800 Model B?

Go to Top